Yatpac - The Ultimate Open Source TLM Simulation Package

Microstrip bend Miter (2)

1. Example Description

In the following the bend miter Microstrip structure of the example Microstrip_bend, see Fig. 1-2 is simulated with a relatively narrowband excitation. Similarly to the case of the example Microstrip_bend_LF no numerical dispersion is observed.

Fig. 1: The model of the bend Microstrip with the ground plane.

Fig. 2: The complete model of the bend Microstrip with the dielectric material.

2. TLM model

The bend miter Microstrip structure, excitation-type and simulation setup are given in the TLM model files I3D.model.

The structure is excited with a Gaussian signal. In this case the time duration of the gaussian pulse such that the simulation bandwidth approximately 31GHz. The excitation is modelled by Templete (see documentation) which excites the field distibution of the fundamental mode. Absorbing boundary conditions are used at the boundaries of the simulation domain.

3. Simulation Results

3.1 Electromagnetic Field Visualization

The visualization sequence, Fig. 3 is similar to the example Microstrip_bend_LF. Form the time domain signals we may see no numerical dispersion, see Section 3.2.

Fig. 3: Snapshot of the electric filed distribution from a top view.

3.2 Computed Time-Domain Signals

Also in this case several different time domain voltage signals are measured at several different positions (see green's lines in Fig. 1 and 2) of the structure, Fig. 5.

Fig. 5: The time domain voltages signals.